TURBINE FLOW METERS
Flow Technology provides turbine flowmeters for a wide range of industries.
FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally accurate and reliable digital outputs. Because of their versatility,these turbine flowmeters are the solution for a wide variety of liquid and gas flow sensing applications. Turbine meters are an ideal solution when high accuracy, compact size, fast response, and high tolerance to shock and vibration are critical requirements. Turbine meter sizes range from 3/8 inch to 4 inches.
FT SERIES
Used in process applications and test & measurement applications.
FT Series turbine flow meters are used in a wide variety of applications. Some examples are automotive and aerospace test stands; subsea control systems; feedback and control systems on aeroderivative turbine generators; as well as general purpose industrial flow measurements. The full range of bearings, end connections, calibrations and electronics are available for this series making it the most versatile, capable of meeting a wide range of applications.
QUICK SPECS
- Designed for a wide range of liquid and gas applications
- Accuracy: ±0.25%
- Repeatability: ±0.05% (liquid) and ±0.1% (gas) of reading.
- Excellent speed of response
- Linearity: ±0.1% (100:1) with linearizing electronics
- Liquid Flow Rates: 0.03 to 1,500 GPM (0.11 to 5,677 LPM)
- Gas Flow Rates: 0.09 to 1,500 ACFM (2.55 to 42,480 ALPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- End Fittings: NPT, AN (MS), Hose Barb, ANSI Flanges, SAE, Tri-Clamp
- Max Pressures: 2000 Bar (30,000 psi), dependent on size and fitting
- Custom engineered solutions available on request
- Optional pressure port tap available
HS SERIES
High shock load applications
HS系列“高冲击”涡轮流量计是规范的欧宝足球官网ifically designed to withstand pressure spikes that create hydraulic shock waves in fluids when actuators or rams are activated. This water hammer effect can dislodge the internals or sheer rotor blades off other turbine designs. The HS Series is based on the FT design providing the same high level of accuracy, with added benefits of a ruggedized housing and reinforced rotor to eliminate protential damage from fluid shock.
QUICK SPECS
- High line pressures and hydraulic shock load applications
- Accuracy: ±0.25%
- Repeatability: ±0.05% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Flow Rates: 0.03 to 450 GPM (0.1 to 1,700 LPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- End Fittings: NPT, MS, SAE 4-Bolt and Dynamic Beam Seal
- Operating Pressure: Size and end fitting dependent
- Custom engineered solutions available on request
KEY BENEFITS
SA SERIES
Sanitary applications
Flow Technology’s sanitary turbine flow meters provide accuracy, versatility and economy in measuring a wide variety of beverage and pharmaceutical products. Flow Technology’s more than 50 years experience enables the company to produce an extremely durable sanitary turbine flow meter with a smooth finish which is designed to eliminate cracks and crevices where bacteria can breed.
QUICK SPECS
- Designed for sanitary applications
- Accuracy: ±0.25%
- Repeatability: ±0.1% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Flow Rates: 0.1 to 250 GPM (0.38 to 946 LPM)
- Materials of Construction: 316 SS housing and 430F SS rotor
- Housing Surface Finish: Electropolished – 25Ra
- End Fittings: Sanitary tri-clamp
- Bearings: Ceramic journal
- Withstands clean-in-place (CIP) and sterilize-in-place
FTO SERIES
Low flow applications
The Omniflo®turbine flowmeters utilize a low frictional drag bearing in a tangential design allowing the measurement of very low flow rates in either liquid or gas. These high resolution, low flow sensing instruments are capable of measuring flow rates as low as 0.001 GPM in liquids and 0.0015 ACFM in gasses.
QUICK SPECS
- Low flow instrument grade flowmeter for both liquid and gas
- Accuracy: ±0.25%
- Repeatability: ±0.1% of reading
- Linearity: ±0.1% (100:1) with linearizing electronics
- Liquid Flow Rates: 0.001 to 2.0 GPM (3.78 to 7,570 mLPM)
- Gas Flow Rates: 0.0015 to 0.3 ACFM (2.55 to 510 ALPH)
- Materials of Construction: 316 SS housing and 17-4PH SS rotor
- End Fittings: Female NPT, AN (MS), and ANSI Flanges
- Bearings: Pivot (sapphire jewel), ball, and journal
- Compact Size: 3 inch face-to-face with NPT and MS connections
- Custom engineered solutions available on request
KEY BENEFITS
COMPATIBLE FLOW METER ELECTRONICS
- microLinK Smart Pickoff
- microLinK Display
- Amplifier Link
- CA04 & PA04 Signal Conditioners
- TWA Flow Transmitter
- Linear Link (LA & LN)
- Linear Link TCI (LAT & LNT)
- BR3000 Battery Powered Rate / Total Display
- MR1000/MB1000 Series Mini Rate Totalizer/Batch Controller
- SL9000/SL9100/SL9200 Series Flow Computers